Pricing Guide
Supplies, Pricing, and BYO Options
You are welcome to bring your own materials for the machines, as long as they fall within our BYO guidelines. Please be aware that we cannot guarantee the quality of the finished product. Finished products not picked up within 3 weeks become library property. We cannot accept BYO materials until you submit your project file.
Laser Cutter Set Prices:
All jobs have a $2.00 “laser fee” that will support the maintenance of the equipment.
Craft plywood (6” x 12”): $2.00
Craft plywood (12” x 12”): $2.50
Craft plywood (12” x 18”): $3.50
Veneer (6” x 12”): $1.50
Acrylic (12”x 12”): $6.00
Depth must be less than 0.5” for cutting
Maximum material width: 20″ (515 mm) Cutting area: aprox. 11″ (279 mm) deep and 19.5″ (495 mm) wide.
Wood: any
Plastic: acrylic only
Glass: any
Paper: any
Ceramic: any with smooth surface
Silicone: any
Aluminum: any
Stainless steel: any
Stone: Any
SPECIAL ITEMS: Includes “Laser Fee”
Slate Coasters: $4.00 Per Item
Cork Coasters: $3.00 Per Item
Leather KeyChain: $3.00 Per Item
Wooden KeyChain: $3.00 Per Item
(please speak with a staff member if you wish to laser cut/etch additional materials to ensure compatibility with our equipment)
Carvera Set Prices:
All jobs have a $2.00 “drill bit fee” that will support the maintenance of the equipment.
Craft plywood (6” x 12”): $2.00
BYO (14.2” x 9.4” x 5” or less and able to lay flat
Chipboard: any
Wood: any
Plastic: any
Metals: non-ferrous
3D Printer Set Prices:
$0.10 per gram of PLA filament used. For resin prints the charge is $0.20 per mL with a $2.00 clean up charge (Library staff will provide a cost estimate before printing).
We cannot run jobs that extend beyond our operating hours (11-12 hours).
Poster Printing Set Prices:
300 dpi or greater, and in one of the following formats: (PDF, EPS, or TIFF) No BYO
19″x 13″ matte ($3/Page)
19″x 13″ glossy ($3/Page)
17″x 22″ matte ($5/Page)
17″x 22″ glossy ($5/Page)
Sewing Machine / Embroidery Machine / Air Serger
Silhouette Cameo Set Prices:
Permanent adhesive vinyl (6” x 12”): 50¢
Permanent adhesive vinyl (12” x 12”): $1.00
Removable adhesive vinyl (12” x 12”): $1.00
Printable sticker vinyl (8.5” x 11”): $1.00
Heat transfer vinyl (12” x 10”): $2.50
Laminator
Lamination Sleeve (8.5” x 11”): $1.00
Sublimation Printing Set Prices:
Mug sized sheet: $1.00 per sheet
8.5” x 11”: $2.00 per sheet
11oz Ceramic Mugs with Sheet Included: $4.00
DTG Printer Prices:
Sticker/Cutter Printer:
Sticker Sheet: $2.00 per Sheet